The Vehicle Communication & Measurement Module (VCMM) combines all of the functionality of the VMM, VCM II, and MTS 4000/4100 vibration analyzer in an industry leading one-box solution. The combining of this functionality will provide dealers with industry leading diagnostic capability at a significantly lower cost of ownership.
This fully rugged tablet is the preferred tablet from Rotunda that meets or exceeds the specifications to run the IDS software with the VCMM, VCM or VCM II. The tablet has been thoroughly tested with the IDS software. See item 164-R9812 for current specifications.
Vehicle Communication (VCM II capability)
Customer Flight Recorder capable
4-Channel Digital Multi-meter
5th-Channel direct monitoring of the DLC connector
4/5 Channel Oscilloscope
Improved user interface from VMM
Four independent differential Input Channels enables independent monitoring of signal types such as monitoring voltage while concurrently measuring voltage drop across the circuit.
A Fifth High Speed Channel that can directly monitor CAN signals at the DLC connector
Capture/Record capability to assist in capturing intermittent issues
Advanced Triggering capability
Pre-Configured setup configuration for common signals and procedures
New “Time/Angle” time based settings (CKP/CMP timing diagnostics)
Vibration Analysis and Driveline Balance
Similar functionality to the MTS 4000/4100
Improved user interface with reduced configuration and setup time
“Strobe light Pick up loop” for improved component identification*
Second vibration transducer
Dual Plane driveline balance
The Digital Multi-Meter
Monitor up to four independent readings at the same time
Graphing capability for up to two channels
Voltage, Current, Resistance, Pulse Width, Duty Cycle, Frequency and Period
User configurable settings for signal waveform types: sine, square, triangle, pulse generator, DC voltage and arbitrary.
Verify integrity of module input wiring and the module hardware
Improved interface and greater adjustability of voltage and frequency.
The VCMM will run on any Windows 7 or higher operating system that has 8GB of RAM or higher.
IDS software subscription required.
Ford iDS License, Ford VCM 2, and the New Ford VCMM’s can be purchased now.
Ford VCM 2 IDS
This tool is the best OEM tool in the marketplace today that will give your shop full dealership capabilities. YOU WILL NEVER HAVE TO TURN AWAY WORK TO THE DEALERSHIPS AND WILL BE ABLE TO DO EVERYTHING ON ALL FORD VEHICLES